Transport And Installation; Transport - Gardner Denver L Series Service Manual

6.1

Transport

DANGER
The compressor or parts of it may fall if
mistakes are made when lifting, and this will
put your life at risk. Safety devices may be
damaged if lifted incorrectly.
 Always observe the safety notes in
Section 4.5 of the user manual.
 Never lift the compressor by or tie onto
its enclosure.
 A suitable fork lift which complies with
local safety regulations must be used
when lifting the compressor.
 The fork length of the fork lift must
correspond to the unit width (see
Section 12.2).
 Keep the distance between the forks
(see Fig. 6) and their length in mind
when transporting the compressor.
 All loose parts or parts which can swing
freely must be safely secured before the
unit can be lifted.
 It is strictly prohibited to stand in the
danger zone of a lifted load.
 Ensure that the transport load approach
is performed properly (according to the
user manual of the lifting device).
Fig. 6
Fig. 7
1 R-clip
2 Hinge pin
Weights
The values listed below are approximate values, they
refer to a screw compressor unit including oil fill:
50Hz/60Hz Air-Cooled
L55
L55RS
L75
L75RS
50Hz/60Hz Water-Cooled
L55
L55RS
L75
L75RS
13-25-638 v03 Page 26
3803 lbs
3805 lbs
3891 lbs
3968 lbs
3630 lbs
3717 lbs
3721 lbs
3800 lbs