Please Do Not Return This Product To The Store - Bissell 8960 User Manual

T
roubleshooting
Cleaner not picking up solution
Possible Causes
1. ReadyTools dial may be at wrong setting.
ng.
2. Tank may not be seated properly.
3. Tank may not be assembled properly.
4. Solution or 2-in-1 water tank is empty.
5. 2-in-1 water tank has picked up
maximum dirty water and red float
door has closed.
6. Red float "door" in the tank may have closed
as a result of bumping an object or moving
machine back and forth too quickly.
Other maintenance or service not included in the manual should be performed by an

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of service.
20
w w w . b i s s e l l . c o m
ug310-5943_9200_608.indd 20
Thank you for selecting a BISSELL product.
Contact us directly at 1-800-237-7691.
authorized service representative.
Remedies
1. Set ReadyTools dial to either
FLOOR CLEANING or TOOLS
setti
2. Pick up both the 2-in-1 water
tank and formula tank and
reseat them so they fit snugly on
the unit.
3. Check to make sure the "lip" of
the nozzle is securely hooked
into the groove on bottom of
Tank (see page 9).
4. Check fluid levels in heavy duty
bladder and formula tank.
5. Empty 2-in-1 water tank. Refill
heavy duty bladder with clean
hot tap water and replace.
6. Turn the machine OFF ( O ),
allowing red float door to release into
the open position. Turn unit back
ON ( I ) to continue cleaning. Be
sure your forward and backward
strokes are done at a slower pace.
8 0 0 . 2 3 7 . 7 6 9 1
6/26/08 2:11:56 PM