Miele EVS 7010 Operating And Installation Instructions page 9


Any contact with live connections or tampering with the electrical
or mechanical components of the drawer will endanger your safety
and may lead to appliance malfunctions.
Do not open the casing of the drawer under any circumstances.

Do not operate the drawer with wet hands or if you are in contact
with water.

Any repairs not performed by a Miele authorized service techni-
cian will void the warranty.

Defective components should be replaced by Miele original parts
only. Only with these parts can safety of the appliance be assured as
intended by the manufacturer.

If the plug has been removed or the power cord is not supplied
with a plug, the drawer must be connected to the power supply by a
suitably qualified electrician.

If the power cord is damaged, it must be replaced with a special
power cord (see "Electrical connection" under "Installation").

If power is interrupted during vacuum-sealing, the vacuum in the
chamber is retained and the glass lid cannot be opened. Do not un-
der any circumstances try to force the glass lid open or use tools to
open it. You will be able to open the lid when power has been re-
stored.

The drawer must be completely disconnected from the power
supply during installation, maintenance and repair work. This can be
ensured as follows:
- The circuit breaker has tripped, or
- The fuse of the electrical installation is completely removed, or
- The plug (if present) is removed from the outlet. In the process,
pull the plug not the cord.
IMPORTANT SAFETY INSTRUCTIONS
9