After Use; Canceling A Vacuum-Sealing Process - Miele EVS 7010 Operating And Installation Instructions

Operation

After use

 Switch off the drawer with the  On/
Off sensor control.
 Clean and dry the drawer and any ac-
cessories as described in "Cleaning
and care".
 Do not close the glass lid until the
vacuum chamber is completely dry.
 Close the drawer.
The last vacuum-sealing setting se-
lected is automatically activated the
next time the drawer is switched on,
and this is shown in the control field.
32
Canceling a vacuum-sealing
process
You can cancel a vacuum-sealing
process at any time, e.g., if you notice
during the process that the edge of the
bag is not positioned correctly or that
the closure on the container lid is not
pointing to "SEAL" (closed).
Please note that if the vacuum-seal-
ing process is canceled while vac-
uum sealing bags, the bag will not be
sealed.
 Touch the Stop sensor control.
The vacuum-sealing process stops.