Miele EVS 7010 Operating And Installation Instructions page 56

Installation
Installing the drawer

Danger of injury due to incorrect
installation.
The drawer is heavy and will tip for-
ward when open.
Installation must be carried out by
two people.
Keep the drawer closed until it has
been installed to the side walls of the
housing unit using the supplied anti-
tipping mechanism.
Check that the base on which the
drawer will sit is clean and level (use
a level). This is important for the ap-
pliance to function correctly.
56
Installing the anti-tipping mechanism
 Measure the distance to the right and
left-hand side walls of the housing
unit (see illustration).
 Mark the uppermost position in the
long slot of the anti-tipping mecha-
nism . Make sure that the anti-tip-
ping mechanism is flush with the
base of the housing unit.
 Secure the anti-tipping mechanism to
the right and left-hand side walls of
the housing unit with the 4 screws
supplied 3/16" x 5/8" (4 x 16 mm).