Cleaning The Drawer Front And Glass Lid; Cleaning The Vacuum Chamber And Sealing Bar; Cleaning The Vacuum Adapter; Cleaning The Vacuum-Sealing Bag Support - Miele EVS 7010 Operating And Installation Instructions

Cleaning and care
Cleaning the drawer front and
glass lid
 Remove soiling and fingerprints with
a standard domestic glass cleaner or
with a clean, damp microfiber cloth.
 After cleaning, wipe the surfaces dry
using a soft cloth.
Cleaning the vacuum chamber
and sealing bar

Damage caused by liquids.
Liquid getting into the vacuum pump
air-intake valve can result in damage
to the vacuum pump.
Take care that liquids do not get into
the air-intake valve.
Tip: To make cleaning easier, the seal-
ing bar can be lifted out.
 Remove soiling immediately using a
solution of hot water and liquid dish
soap applied with a clean sponge or
use a clean, damp microfiber cloth.
 Remove any residual cleaning agent
with some clean water.
 After cleaning, wipe the surfaces dry
using a soft cloth.
34

Cleaning the vacuum adapter

 Clean the vacuum adapter with a
clean sponge and a solution of hot
water and liquid dish soap or a clean,
damp microfiber cloth.
 Then dry the vacuum adapter with a
cloth.
 Do not use the vacuum adapter again
until it is completely dry.
Cleaning the vacuum-sealing
bag support
 Clean the vacuum-sealing bag sup-
port with a clean sponge cloth, liquid
dish soap, and warm water or with a
clean, damp microfiber cloth.
 Then dry the vacuum-sealing bag
support using a cloth.
 Do not use the vacuum-sealing bag
support again until it is completely
dry.