Miele EVS 7010 Operating And Installation Instructions page 41

Problem
The vacuum-sealing
process is canceled af-
ter 5 seconds. A signal
sounds and the  indi-
cator light lights up red.
Abrasion marks on the
top edge of the front
panel.
Frequently Asked Questions
Possible cause and solution
The glass lid is not sitting evenly. There is an object,
such as the edge of a bag or some soiling, on the
surface of the chamber seal.
 Remove the obstruction and/or the soiling.
 Close the glass lid.
 Press lightly on the black triangle on the glass lid
for approx. 5 seconds.
The chamber seal is not installed correctly.
 Press the chamber seal in all the way round to
make sure it is installed evenly.
The chamber seal is damaged, e.g., cracks can be
seen.
 Contact Customer Service to have it replaced.
Installing or removing an appliance above the drawer
has caused abrasion marks.
 Carefully remove the abrasion marks by rubbing
the top edge with the abrasive side of a standard
scouring pad.
41