Threading: 5-Thread Overlock; (Chainstitch & 3-Thread Overlock) - JUKI MO-655N Instruction Manual

Threading: 5-thread overlock (chainstich & 3-thread overlock)
14
13
14
13
12
12
11 10
11 10
13
13
1
2
1
2
3
4
3
4
5
5
7
7
6
6
8
8
9
9
12
12
11
11
10
10
1. Upper looper thread (Blue)
Place the spool on the spool pin right under blue marking on the
retractable support rod thread guide.
(1,2) Bring thread up from the rear of the retractable support rod
thread guide with blue marking, to the front of it.
(3,4) Pass the thread through the thread guide plate. Looping as
shown.
(5) Snap the thread into the thread guide.
(6) Lay the thread between the thread tension dial discs.
(7,8,9,10,11,12) Thread the thread guides.
(13) Turn the handwheel until the upper looper is fully raised.
Thread upper looper eye.
(14) Pull about 10 cm of the thread out.
Place the thread under the presser foot, and pull the thread
from behind the presser foot.
Use a net for a hard twisted thread.
When a thread coils around the thread guide due to its hard twist,
cover the spools of upper looper and lower looper with nets.
18