Assembling Thread Stand - JUKI MO-655N Instruction Manual

Assembling thread stand

7
Raise the support rod fully
Turn the thread stand until it engages the positioning stopper (A)
with a click.
A
A
A
Put the thread guide on the support rod.
Insert the thread guide into the tip of the support rod so that the
arrow in the thread guide points toward you.
Attaching the spool holders
Attach the separately packed spool holder (equipped with two spool
holders pins) to the fixed spool holder, by pushing until it snaps in
place.
For small house-use spools
3
3