Birlea COTSWOLD Assembly Instructions Manual

Vendor: S000159
ASSEMBLY INSTRUCTIONS
COTSWOLD SLEEP STATION - BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR COTSWOLD
SLEEP STATION.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all legs to stop
the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame collapses.
WARNING: High beds are not suitable for children under the age of six due to the risk of injury from falls.
WARNING: High beds can present a serious risk of injury from strangulation if not used correctly. Never attach
or hang items to any part of the bed that are not designed to be used with the beds e.g. rope, string, cords,
hooks, belts, bags etc.
WARNING: Children can become trapped between the bed and wall, roof pitch, ceiling or adjoining piece of
furniture. To avoid the risk of serious injury, the distance between the top safety barrier and adjoining
structure should not exceed 75 mm or shall be more than 230 mm.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
The maximum mattress height recommended for this frame is 200 mm.
It is necessary to ventilate the room well to keep humidity low and to prevent formation of mold in or
around the frame.
www.birlea.com
Page 1 of 10