Table of Contents
Advertisement
Problem
Speaker Settings
•
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case,
set the TV to External Speaker.
-
When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will
be limited.
When Speaker Select is set to External Speaker.
-
•
TV Speaker: Off, External Speaker: On
-
When Speaker Select is set to TV Speaker.
•
TV Speaker: On, External Speaker: On
-
If there is no video signal, both speakers will be mute.
There is a vertical line (red,
green, blue) on picture.
When I use the unit as a monitor,
the image seems blurry.
When I changed PC resolution,
"Not supported mode" OSD is
displayed.
I can not hear any sound from
speaker in HDMI mode when
using a DVI-HDMI conversion
cable.
Although the TV caption shows
HD, the visual quality is not
satisfactory.
The visual qualities of digital
channels vary
HDMI Black Level does not work
on HDMI device that is output by
YCbCr.
There is no sound when using
HDMI mode.
New Functions
Problem
I lost the 'PC Share Manager' install CD.
You can download E-manual and DLNA install program in samsung's web site. (www.samsung.com - support - download cener - enter
your model name.
Sound of HDMI1/DVI
No sound in HDMI/DVI mode.
Auto Motion Plus
Solution
•
This occurs when TV set has a defect on one line from DATA SOURCE DRIVER IC.
Contact Samsung Service centre to resolve this problem.
•
Blurry images can occur when the resolution is other than those recommended in
the user guide or if the signal is unstable. In order to resolve this, please change the
resolution of the PC to one of those which are recommended.
•
When the resolution of the input signal exceeds the operating range of the display,
"Not supported mode" OSD will displayed. In order to resolve this, please change the
resolution of the PC to one supported by the display unit.
•
If the input signal is DVI RGB signal through an HDMI conversion cable, there is no digital
sound data, you can not hear any sound. A DVI connection does not carry any sound
data. You should connect an audio cable to the appropriate input jack for a seperate audio
channel.
•
The HD caption that appears when switching channels or when pressing the Information
button on the remote control means the selected channel is simply a digital channel. If the
broadcasting station converts an analog signal into digital and transmits the signal, the
visual quality may not be perfect."
•
The visual qualities of digital channels may vary depending on the original production
method (analog or digital)
-
Grouping displayed information when switching channels.
If the original production method is digital: High visual quality program.
-
If the original production method is analog: The digital program displayed on the
-
screen is originally an analog program which has been converted. The visual quality
is of an SD grade.
•
This function is active only when the an external device (DVD player, STB etc.) is
connected to the TV via HDMI(RGB Signal).
•
If you use external equipment that support low HDMI version, sound may not be output at
TV that support new HDMI version(HDMI1.3).
If sound does not work, use HDMI2 IN for video input and DVI IN(HDMI1) port[R(red)
-
- AUDIO - L(white)] for audio input.
Solution
•
In HDMI/DVI input, set judge source type(HDMI or DVI), and select sound automatically.
But a part of PC graphic card transemits HDMI source that doen't contain sound. So, you
can select sound input yourself. Refer to below edit name chart.
This table apply to HDMI1/DVI port only.
-
4. Troubleshooting
4-7
Advertisement
Table of Contents
