Samsung UN75ES9000F Service Manual page 112

2012 LED Factory Test Mode (ES9000)
Main Board Patterns Test
Select: EchoP Pattern Sel
T-CON Patterns Test
Select: T-CON Test Pattern
• If T-CON is OK and
• If T-CON is OK and
• If T-CON or Echo-FP Post Test Pattern
1. With TV Power On...
"Mute/147/Mute"
for a
&
Board Test Pattern
2. Access
Standby: Mute,182,power
Power On: Info, Factory
& Select
3. Select
4. Select
Use the right arrow key to
Scroll through patterns
5. Select
or
Use the right arrow key to
scroll through the patterns.
EchoP (Main Board) is OK the problem is normally the source or input
EchoP (Main Board) is not OK, problem is the LVDS Cable or Main Board.
is not OK then the problem is the T-CON Board or PANEL
Test Procedure:
Main Board Test Pattern
"Mute/369/Mute" for a
Factory Mode
SVC
Test Pattern
EchoP Pattern Set
SOC T-CON Test Pattern
Echo-FP Post Test Pattern
T-CON