SMART/RG SR808ac Quick Start Manual

SMART/RG SR808ac Quick Start Manual

Hide thumbs Also See for SR808ac:

Advertisement

Quick Links

Quick Start Guide
SR808ac
This Quick Start Guide shows you how to set up and start using your new gateway.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR808ac and is the answer not in the manual?

Questions and answers

Summary of Contents for SMART/RG SR808ac

  • Page 1 Quick Start Guide SR808ac This Quick Start Guide shows you how to set up and start using your new gateway.
  • Page 2: Installation

    Installation 1. Connect one end of the supplied coax cable to the port labeled Cable on the gateway. 2. Connect the power adapter to a wall outlet and to the Power port on the gateway. Press the On/Off button on the gateway to turn it on.
  • Page 3 3G USB Data Card / LTE RESET WPS CABLE ON/OFF POWER...
  • Page 4: Led Status Indicators

    LED Status Indicators The LEDs on the SR808ac can help you understand the current state of your gateway. Note: The POWER, DS, US and ONLINE LEDs may flash briefly when the gateway boots up. Legend: White White blinking Blue Blue blinking...
  • Page 5: Quick Gateway Configuration

    Quick Gateway Configuration Logging in to your gateway To change the settings on your gateway, you must log in the gateway's interface. Make sure that you have completed the steps in Installation before you begin. 1. Open your internet browser application and type 192.168.0.1 into the address line. The login dialog appears. 2.
  • Page 6 WiFi Setup Two methods, WPS and Manual, are available for WiFi setup. Perform the steps on this page for both methods, and then follow the instructions for the method you prefer. The default settings work for most situations. 1. Click the Wireless tab.
  • Page 7: Wps Method

    WPS Method If the device you wish to connect to the Internet via your gateway supports the WPS secure Wi-Fi connection method, follow these steps. 1. Click the Wireless tab and then click Primary Network in the left navigation bar. 2.
  • Page 8: Manual Method

    Manual Method Set up your gateway’s other parameters first, then follow these steps. 1. Click the Wireless tab and then click Primary Network in the left navigation bar. 2. If your gateway supports multiple wireless networks, in the Network Name (SSID) field, select the SSID of the network you wish to configure.
  • Page 9: Additional Support

    Record Your SR808ac WiFi Settings Predefined wireless settings If you change the preset wireless settings WiFi network name (SSID) 2.4 GHz 5 GHz Network key (password) 2.4 GHz 5 GHz Additional Support If you require further instructions, please contact your local ISP Support.

Table of Contents