SMART/RG SR516ac Quick Install Manual

Wi-fi home gateway

For a

wired connection

set up, connect one end of the Ethernet Cable

provided to the LAN 1 port on the back of the gateway and the other

end to your computer

In order to initialize your Internet connection for the first time,

visit dsl.primus.ca and following the on screen instructions.

Once complete you can now connect up to 3 additional devices to the

LAN ports located on the back of your gateway.

If the "Internet" LED fails to turn on, do a factory reset by using a paperclip

to push the reset button on the back of the gateway and hold for 10 seconds.

Then complete the steps above once more. If the "Internet" LED still is not

solid green, please contact Technical Support for further assistance at

1-800-506-5552.

For general support for your Internet and email services please visit our

support website support.primus.ca.

Thank you for choosing Primus.

SmartRG SR516ac Wi-Fi Home Gateway

Quick Install Guide

See inside to understand how to get the best internet

experience by using your Dual Band Wi-Fi Network

To get familiar with the set-up steps visit

primus.ca/516video

Q218

Table of Contents

Need help?

Do you have a question about the SR516ac and is the answer not in the manual?

Page 1 LAN 1 port on the back of the gateway and the other end to your computer In order to initialize your Internet connection for the first time, SmartRG SR516ac Wi-Fi Home Gateway visit dsl.primus.ca and following the on screen instructions. Quick Install Guide Once complete you can now connect up to 3 additional devices to the LAN ports located on the back of your gateway.
Page 2 Thank you for selecting Primus for your Internet service. Primus-XXXX To connect to the 2.4GHz network, select: Click ‘Connect’ and enter the alpha-numeric Wi-Fi key exactly as Enclosed you will find your Wi-Fi home gateway and everything you need to found on the sticker on the bottom of your gateway (Wi-Fi password start surfing the Internet.