Switch A Call Between Phone And Headset; Use The Headset With Several Phones; Reset The Headset - Nokia AD-5B User Manual

All manuals and user guides at all-guides.com
U s e t h e h e a d s e t

■ Switch a call between phone and headset

To switch a call from the headset to a phone or from a phone to the headset, press
and hold the answer/end key for 2 seconds; or use the respective function in your
phone.

■ Use the headset with several phones

The headset can be paired with up to eight phones but connected to only one
phone at a time.
The phone that was first paired with the headset is called the default phone. The
phone that was last used with the headset is called the last used phone.
If the headset is switched on within 10 metres of several paired phones, the
headset will try to connect to the default phone within a few seconds.
If the headset cannot connect to the default phone (for example, when it is
switched off or its user rejects the connection), the headset tries to connect to the
last used phone within a few seconds. If the headset cannot connect to either of
the phones, it remains discoverable for other phones.
If you want to use the headset with a paired phone that is not a default phone or
last-used phone, make the connection in the Bluetooth menu of your phone.

■ Reset the headset

You can reset the headset to its original settings to change the default user of the
headset. When you reset the headset, all of its settings, including pairing
information, are cleared.
To reset the headset, press and hold the power key and the volume up key for
10 seconds. After the headset has been reset, it beeps twice, and the red and green
indicator lights alternate for several seconds.
24