Page 2
"door open" message Audio Settings of the Monitor, panel and open door. Microphone Connection Panel Connectors: B,B: DUOX Bus: telephone/monitors power, data, audio and video. C, NO, NC: Relay contacts 2A@30Vdc (lock-release connection). +12: 12 Vdc-250mA output (maximum 500mA for 100 seconds).
Page 3
3. If the call button is pressed for 5 seconds, a BOOP sounds and the parameter, if a number, is set to its minimum level and if another value, is reset to the default value. DIAGRAM DUOX VIDEO...
Page 4
To leave the programming mode you need to press ‘A’ when introducing the position number of the menu. It will also automatically exit after 60 seconds without the need to press any key, generating a beep-beep tone. DUOX VIDEO...
MODULE CLAVIER MODULE CLAVIER TASTATURMODUL TASTATURMODUL Connect the 5 channel cable to the keyboard (CN1): leave the pin on the right free. SALIDA/OUTPUT SALIDA/OUTPUT SORTIE/AUSGANG SORTIE/AUSGANG ref. 7439 ref. 7439 Note: See Confi guration Table in Direct Panel. DUOX VIDEO...
Need help?
Do you have a question about the Duox and is the answer not in the manual?
Questions and answers