Firmware Update; Firmware Update Instruction; Figure 5: Firmware Update Confirmation - WHALETEQ SECG 4.0 User Manual

Single channel ecg

Hide thumbs Also See for SECG 4.0:

Table of Contents

2.4

Firmware Update

Firmware Update only can be supported with specific hardware and

firmware, so if your SECG 4.0 doesn't support the feature, please contact

Whaleteq for upgrade at service@whaleteq.com.

Question:

How to check your SECG 4.0 has supported Firmware Update?

Answer:

Connect the SECG 4.0 device to PC. Go to "About", and check whether

the "F/W Version" and "H/W Version" buttons are hidden. (Please see

Step 1 in the below section for where to find "About".)

Not Support Firmware Update

There are risks of losing data if improper options are performed during the

firmware update period.

If your SECG 4.0 supports "Firmware Update" feature. Below is the step-by-

step instruction for how to update firmware:

Step 1.

Connect the SECG 4.0 device to PC, then open SECG application with

version 5.0.0.6 or higher. Move the cursor to System Menu Bar, right

click your mouse. Then there will show up a menu, select "About".

Note:

Support Firmware Update

SECG 4.0 | User Manual

Table of Contents

Do you have a question about the SECG 4.0 and is the answer not in the manual?