Mixers; Routing Of An Input Source; Adjusting The Sources'input Level; Setting The Master Mix Level - Digigram IQOYA TALK User Manual

MIXERS

The Mixers menu provides three functions:
route an input source
-
adjust the level of the input source
-
- adjust the level of the output master mix
IQOYA TALK includes 2 distinct mixer modes for 2 different use cases:
- TV mode
- Radio mode
The choice of this mode is made on the page
By default, Radio mode is selected.

ROUTING OF AN INPUT SOURCE

Routing allows to assign an input source to an output (right or left).
It is done by a simple touch on the source's grid point:
- Not Activated
- Activated

ADJUSTING THE SOURCES'INPUT LEVEL

Add level at each of your inputs to make a mix that correspond to your needs and preferences.
The source level is adjusted by clicking on:
Sources Inputs:
Digital level range: -76 dB to +15 dB
Double clicking on the main rotary knob brings the fader level back to 0 dB

SETTING THE MASTER MIX LEVEL

Master Mix allows to set a level on the final mix.
Do not confuse levels with volumes, which are configurable in the Audio Settings Outputs.
The master mix setting is adjusted by clicking on:
Master Mix Outputs:
Digital gain range: -76 dB to +15 dB
Double clicking on the main rotary knob brings the fader level back to 0 dB

Chaining the sources:

Stereo / Two Mono:
Chaining between channels Left and Right is possible for AUX IN, PROGRAM TX and PROGRAM RX sources.
Advanced settings/Headphone.
IQOYA TALK
Portable IP audio codec
39