Parameters For The Wi-Fi Interface; Settings For The Cell1 And Cell2 Interfaces - Digigram IQOYA TALK User Manual

Parameters for the Wi-Fi interface:

This feature is currently not available, and will be after a firmware upgrade.

Settings for the Cell1 and Cell2 interfaces:

These settings need to be configured only once.
Parameter
Status
APN (Access Pin Name)
Pin CODE
Dial up number
Meaning
Once a SIM card has been inserted into the SIM card tray, the corresponding
menu will become available.
This parameter allows enabling/disabling the interface.
Default value: disabled.
Enter the parameter given by the network operator.
If needed, enter the parameter given by the network operator.
If needed, enter the parameter given by the network operator.
Click on "APPLY" before leaving the page to save the changes.
IQOYA TALK
Portable IP audio codec
25