5. CONFIGURATION MENUS
CONNECTION
NETWORK
The first tab of this menu is NETWORK, it allows to configure each network interface: Ethernet 1, Ethernet 2, Wi-Fi,
Cellular 1, and Cellular 2.
Parameters for the Eth1 and Eth2 interfaces:
Parameter
Physical address
DHCP
IPv4 address
Meaning
Displays the physical address automatically of the Ethernet module.
Allows enabling/disabling DHCP (Dynamic Host Configuration Protocol).
Click on the switch to disable DHCP.
When DHCP is activated, it disables the following parameters.
Default value: YES (enabled).
DHCP Off
Allows to type in a static IP address
for this Ethernet interface.
IQOYA TALK
Portable IP audio codec
DHCP On
Displays the IP address automatically
set through DHCP.
23