Table of Contents
Advertisement
-
In TV mode: Adjusts the level of each input source selected on the HP Mixer page (this level can also be
configured from Mixers HP1).
Pressing the selected icon gives access to the source level setting.
HELP KEY
For the time being, this feature is not activated. The HELP key will be available after a firmware upgrade.
ON AIR BUTTON
The ON AIR button allows to mute or active its dedicated Mic/Line input.
Remember: Check your Mixer tab to configure your Mic/Line output path (TX Program, Headphones, and AUX).
TB1/TB2 KEYS
Work only on "TALENT 1" and "TALENT 2" zone.
In communication, pressing the TB1 or TB2 pushbutton:
-
Mutes the corresponding Mic/Line input on the AUX, Program TX and REC outputs.
-
Routes this input to the selected TB output with a "Push to talk" behaviour. If both the same TB buttons
are pressed, then the inputs are mixed.
For outputs, HP1 & HP2 can only monitor RX Talkback channels according to the settings made in the mixer
menu (for both TV and Radio modes).
IQOYA TALK
Portable IP audio codec
17
Advertisement
Table of Contents
