Advanced Settings - Digigram IQOYA TALK User Manual

Advanced Settings:

With some SIP infrastructures you might have to adjust advanced parameters. Click on the advanced settings to
access to the advanced parameters:
Parameter
Server port
Transport protocol
Listening port
Registration every
(seconds)
Proxy
Proxy activation
Presence
Presence activation
Notification lease (seconds)
Net topology-related settings
Connection to public internet Select the proposition that best
Direct connection
34
Meaning
Listening port of the SIP server providing the SIP account.
This parameter is optional, if no listening port is provided, then the default SIP
listening port is used, which is 5060.
The protocol to be used to transport
SIP signaling: It can be UDP or TCP.
The choice depends on your SIP
infrastructure.
Port to be used by the IP codec instance to listen to the SIP signaling.
IQOYA TALK proposes you a free port. Keep the default value to avoid port
conflicts.
This is the refresh period of the SIP registration in seconds. It is not
recommended to enter a value below 30s. The default value is 120.
Enable/disable the use of a SIP proxy.
Enable/disable the SIP presence service.
Do not disable the SIP presence service if you use Digigram's SIP infrastructure
IQOYA CONNECT.
This is the refresh period of the subscription to the presence service.
The lease value must be greater than the field 'Registration every (seconds)'.
Default value: 300s
matches with your
connection topology.
Ask you IT team if you don't know.
Displayed only if "Connection to public internet" is ...............
Default settings
IQOYA CONNECT, Digigram's SIP
infrastructure, supports both but
UDP is preferable ; although with
some LTE providers, TCP is needed
for the registration to work.
If you are using IQOYA CONNECT,
internet Digigram's SIP infrastructure, choose
"Direct connection" because IQOYA
CONNECT integrates a NAT traversal
solution.