Avocent PS/2 IP User Manual page 57

SNMP Logging enabled
If this is activated, the PS/2 IP-KVM switch sends a SNMP trap to a specified destination
IP address, every time a log event occurs. If the receiver requires a community string,
you can set it in the appropriate text field. Most of the event traps only contain one
descriptive string with all information about the log event. Only authentication and host
power events have an own trap class that consists of several fields with detailed
information about the occurred event. To receive this SNMP traps, any SNMP trap
listener may be used.
In contrast to the internal log file on the PS/2 IP-KVM switch, the size of the NFS log
file is not limited. Every log event will be appended to the end of the file so it grows
continuously and you may have to delete it or move it away from time to time.
6.5 Maintenance
6.5.1 Device Information
Board Summary
This section contains a summary with various information about this PS/2 IP-KVM switch and
its current firmware, and allows you to reset the card.
Data file for support
This link allows you to download the PS/2 IP-KVM switch data file with support information.
This is an XML file with certain customized support information like the serial number etc.
Warning
Figure 6-31. Device Information
57
8/16/32 PS/2 KVM over IP switch