Table of Contents
Advertisement
DV-T27N-SJ 99.11.26 5:3 PM ˘ ` 21
Recording programs
You have three options for recording TV programs:
Manual, Timer, and One touch recording.
Preparing to record a program (manual or timer)
See "Selecting cable or
Before you begin recording:
antenna viewing. "p.14,
•Turn on the television.
for information on setting
the viewing mode.
•Set the TV to channel 3 or 4 or to the video input.
•Insert a video cassette (with a safety tab) into the VCR.
•If the VCR indicator
•If your VCR is connected to:
Press P/S if you would
– an antenna, set the viewing mode to "ANTENNA."
like to momentarily stop the
recording. Press REC/OTR to
– a cable system, set the viewing mode to "CABLE."
resume recording. If you do
not press REC within five
Manual recording
minutes of pressing P/S, the
VCR will automatically
Watching and recording the same channel
release the pause and stop
the recording to prevent
To watch and record the same channel:
damage to the tape.
1
Be certain to do the steps in the section, "Preparing
to record a program," above .
2
Use 0-9 or –CH/TRK+ to select the channel number.
3
Press SPEED to select the recording speed.
4
Press REC/OTR to begin recording. The REC
indicator lights.
•Press STOP to stop the recording.
Since the VCR has its
own TV tuner, it is not
necessary to turn on the TV
Watching one channel and recording another
in order to make a
recording. Turning on the
1
Perform steps 1-4 in "Watching and recording the
TV merely allows
same channel," above.
confirmation of proper
channel settings on your
2
Press TV/VCR to switch to TV mode.
VCR.
3
Use the television's remote control to select the
television channel you want to watch. The VCR will
continue to record the program.
21
is not lit, press
TV/VCR.
Recording programs,
continued
Timer recording
There are four timer modes: One time, Daily, Weekdays,
and Weekly
Timer recording allows
1
Be certain to do the steps in the section, "Preparing
you to record up to eight
to record a program," as shown on previous page.
different programs within
one year period.Once you
2
Make certain the clock is set to the correct time.
have set the timer for timer
3
Press MENU to display the menu.
recording, the VCR will
turn on, record the
4
Press 1 to select Timer Recordings.
program you selected, and
then shut off automatically.
5
Press 1 to select Make a New Program.
6
Press 1 for One Time; 2 for Daily; 3 for Weekdays,
or 4 for Weekly.
7
Use 0-9 to enter the channel number to record.
If the VCR is in cable
While the VCR is in the CABLE mode, if a channel
box setup mode, the preset
channel number will be
over 100 is desired, press 100's key and then the
displayed automatically.
next 2 digits in order.
TIMER RECORDINGS
1 Make a New Program
2 Review/Cancel Programs
MENU Exit
How often do you want
to record program?
1 One Time
2 Daily (Sun-Sat)
3 Weekdays (Mon-Fri)
4 Weekly (Once a week)
MENU Exit
PROGRAM1 (ONE TIME)
Channel
– –
Start Time – –
– –
:
End Time
– –
– –
:
Start Date – –
– –
– –
/
/
Tape Speed EP
MENU Cancel
PROGRAM1 (ONE TIME)
Channel
06 Cable
Start Time – –
– –
:
End Time
– –
– –
:
Start Date – –
– –
– –
/
/
Tape Speed EP
CLEAR Correct
MENU Cancel
22
Advertisement
Table of Contents
