Audiovox AVP-7380 Owner's Instruction Manual
Audiovox AVP-7380 Owner's Instruction Manual

Audiovox AVP-7380 Owner's Instruction Manual

Video cassette player and built-in tv tuner with voice status annunciator
Hide thumbs Also See for AVP-7380:

Advertisement

Quick Links

MODEL AVP-7380
Video Cassette Player
and
Built-in TV Tuner
with Voice Status Annunciator
Owner's Instruction Manua
l
128-6163
1 of 24

Advertisement

Table of Contents
loading

Summary of Contents for Audiovox AVP-7380

  • Page 1 MODEL AVP-7380 Video Cassette Player Built-in TV Tuner with Voice Status Annunciator Owner’s Instruction Manua 128-6163 1 of 24...
  • Page 2 THIS PAGE INTENTIONALLY LEFT BLANK 128-6163 2 of 24...
  • Page 3: Table Of Contents

    Contents Thank You ... 3 Safety Precautions ... 3 Cautions and Warnings ... 5 Important Safeguards ... 6 Service ... 7 Features ... 9 Front Panel Operation ... 10 Rear Panel Connections ... 11 Remote Control Operation ... 13 Getting Started ... 15 VCP to Vehicle Connection ...
  • Page 4 5. Cleaning - Unplug or turn off vehicle power to the Video Cassette Player before cleaning. Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning. Attachments - Do not use attachments not recommended by the Video Cassette Player manufacturer as they may cause hazards.
  • Page 5: Cautions And Warnings

    C. Cautions and Warnings 1. Cleaning Video Head Use only good quality VHS tapes and discard worn out tapes to prevent video head clogging. If the heads get dirty over a period of time during normal operation of the VCP, the picture will be snowy and the auto-tracking will not adjust the snow out of the picture.
  • Page 6: Important Safeguards

    6. Cleaning Unit Made sure unit is unplugged from power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. 7. Power This unit should be operated only from the type of power source indicated on the marking label.
  • Page 7: Service

    When moving the VCP from a cold place to heated place. Or the temperature of surroundings goes up due to vehicle heating switched on. Or moving the VCP suddenly from air con- ditioned room to a place of high temperature or humidity in summer may cause the dew indicator to appear on video monitor display.
  • Page 8 Servicing- Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement of Parts - When replacement of parts is required, be sure the service technician has used replacement parts speci- fied by the manufacturer that have the same characteristics as the original parts.
  • Page 9: Features

    E. Features CONGRATULATIONS on your purchase of the Audiovox Model AVP-7380 Video Cassette Player. This unit is designed to satisfy all your VHS tape playback needs and with proper use and care, will offer many years of viewing enjoyment. The features of the Model AVP-7380 Video Cassette Player include: •...
  • Page 10: Front Panel Operation

    Features (Continued) 3 MONITOR OUTPUT PORTS • FRONT AND REAR A/V INPUTS • BUILT-IN 69 CHANNEL TV TUNER • BUILT-IN VCP STATUS ANNUNCIATOR • • FULL FUNCTION REMOTE F. Front Panel Operation POWER Button (1) When pressed this button alternately turns the VCP on and off. When power is turned on, the annunciator says “Power On”;...
  • Page 11: Rear Panel Connections

    STOP/EJECT Button (4) When pressed once, the annunciator says “Stop” and the tape is stopped. When pressed again the tape is ejected. REW/Review Button (5) If this button is pressed in the PLAYBACK mode, the VCP enters the reverse picture search mode. If pressed in STOP mode, the annunciator says “Rewind”...
  • Page 12 G. Rear Panel Connections DC 12V INPUT Jack (1) When using a DC power source, connect this jack to 12 Vdc ANT. Connector (2) Connect the TV antenna to this connector. MONITOR PORT 1 Connector (3) Connects to external Monitor for remote viewing purposes. MONITOR PORT 2 Connector (4) Connects to external monitor for remote viewing purposes.
  • Page 13: Remote Control Operation

    EXTERNAL SPEAKER 1. Voice High/Low/Off Switch 2. Plug of Speaker H. Remote Control Operation TV/VIDEO Button (1) Pressing this button selects from TV (external antenna connected to the Antenna jack), VIDEO 1 (internal VCP) or VIDEO 2 (front or rear A/V inputs). NOTE: Plugging into the front panel A/V inputs overides all other inputs.
  • Page 14 ERASE/WRITE Button (4) This button is used to add or erase channels from memory. To erase a channel, use the keypad buttons to select the desired channel and press the ERASE/WRITE button; ERASED will appear on the screen. To add a channel to memory, use the keypad buttons to select the desired channel and press the ERASE/WRITE button;...
  • Page 15: Getting Started

    PLAY Button (11) Press this key to play back a recorded tape. In the playback mode, the annunciator says “Play” and the playback indicator lights. STOP Button (12) When pressed once, the annunciator says “Stop” and the tape is stopped. When pressed again the tape is ejected. I.
  • Page 16: Making Vcp Connections

    (TV, VCP, Rear Aux input) b. Plug the video output from an auxiliary source such as DVD Player, VCP, VCR and so on into yellow video jack, and the audio L and audio R into the appropriate jacks in the rear of the unit.
  • Page 17: Basic Operation

    the built-in voice annunciator to the Speaker. Use the LOW/ MED/HI switch to adjust the volume. 6. Control the Unit Remotely: Plug REMIR into this jack and extend the sensor of the REMIR to where the driver can control the unit conveniently with the Remote Control pointing to the sensor.
  • Page 18 b. Unloading the Cassette: If the VCP is in the playback mode, press the STOP/ EJECT button twice; the first press will stop tape play, and the second press will eject the tape. NOTE: The cassette will be ejected even if VCP power is off, as long as the unit is connected to the power source.
  • Page 19 8. ERASE/WRITE To erase a TV channel, press the ERASE/WRITE key until MANUAL MEMORY has “erase” displayed on the screen. To store a TV channel, press this key until MANUAL MEMORY has “add” displayed on the screen. 9. VCP AUTO START After plugging the DC power cord, push the cassette into the cassette compartment gently, the VCP automatically powers on if it was off, and goes into the play mode.
  • Page 20 b. Press the REWIND key in the stop mode, the voice an- nunciator will say “REWIND” , and the tape will rewind at a very high speed without any picture or sound. The rewind indicator lamp will blink very quickly. 13.
  • Page 21: Specifications

    Specifications System Remote Control Antenna Channels Audio track Tape width Tape speed SP Playback time SP mode FF/REW time Heads Video Output Video signal-to noise ratio Audio output Audio signal-to–noise ratio SP Frequency response SP Power Supply Power Consumption Operating Humidity Operating Temperature Storage Temperature Dimensions (W x H x D)
  • Page 22: Feature List

    L. Bill of Material * 1 x VCP with built-in TV Tuner & Voice Status Annunciator * 1 x Speaker * 1 x Remote Control * 1 x REMIR * 1 x DIN Convertor Cable * 1 x DC Power Connector * 2 x Brackets with 4 x Screws * 1 x Owner’s Manual 128-6163...
  • Page 23 36 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship...
  • Page 24 © 2001 Audiovox Electronics Corp., Hauppauge, NY 11788 Printed in Korea 128-6163 128-6163 24 of 24...

This manual is also suitable for:

1286163

Table of Contents