Table of Contents
Advertisement
DV-T27N-SJ 99.11.26 5:3 PM ˘ ` 17
Setting up your VCR,
4
Press 2 to select Add/Remove Channels.
5
Press DISPLAY to add the channel.
6
Press MENU three times to exit from the menus.
Setting the Cable Box (Cable Box Setup)
1
Press MENU to display the menu.
2
Press 3 to select Channel Set.
3
Press 4 to process Cable Box setup
4
Press the channel number (01~13) or input key
When you make a timer
which matches to the output of the Cable Box to
recording, the preset
connect between Cable Box and VCR.
channel number will be
displayed automatically.
5
Press CLEAR on the remote to correct setup status.
6
Press MENU when you are finished.
7
Press MENU to exit the menu system.
17
continued
ADD/REMOVE CHANNELS
Channel 06
is now REMOVED.
DISPLAY Add
MENU Exit
ADD/REMOVE CHANNELS
Channel 06
is now ADDED.
CLEAR Remove
MENU Exit
CABLE BOX SETUP
On what channel do you
want to receive from
the cable box?
0 – 9
01 –13
INPUT Video
MENU Cancel
CABLE BOX SETUP
On what channel do you
want to receive from
the cable box?
0 5
CLEAR Correct
MENU Save
Using video cassettes
Before you play or record on a video cassette tape, be
Audio-visual material
certain to read this information on the proper care and
may include works of
copyright which must not be
use of video cassettes.
recorded without
Only use video cassettes that bear the VHS mark:
authorization of the
copyright owner.
There are four types of video cassettes: T-60, T-90,
T-120, and T-160. The amount you can record on a tape
is dependent upon the tape speed at which you record.
The table below lists the recording time(hours:minutes)
for each tape type according to recording speed.
If you insert a video
cassette without a safety tab
Tape
into the VCR:
Type
•After setting the timer
recording program, "
" will
blink on the display panel
T-60
in the power off mode and
T-90
the VCR will automatically
T-120
eject the cassette.
• In the power on mode, the
T-160
VCR will playback
automatically
Protecting video cassettes from accidental erasure
If you insert a video
cassette with a safety tab
intact into the VCR:
• After setting the timer
recording program,the VCR
will be stand-by mode in
power off mode.
!
• Do not attempt to pull out
Inserting video cassettes
the video cassette once the
VCR begins to load the
Firmly insert the cassette into the cassette compartment
video cassette.
with the label up. An inverted cassette cannot be inserted.
• Do not insert fingers or
Removing video cassettes
any foreign object
beyond the door flaps of
Press STOP/EJECT on the VCR front panel and the VCR
the cassette compartment;
will eject the tape. Pull the cassette out gently.
this could lead to injury or
equipment damage.
• Do not attempt to insert a
video cassette if the VCR
in unplugged.
.
SP Mode
EP Mode
(Standard Play)
(Extended Play)
1:00
3:00
1:30
4:30
2:00
6:00
2:40
8:00
Cassettes have a safety tab to prevent
erasure. Break off the safety tab
with a screw driver. If you wish to
record on a cassette without a safety
tab, cover the hole with cellophane
tape.
18
Advertisement
Table of Contents
