Important Notice; How To Watch Tv - Audiovox AVD 400T Owner's Manual

IMPORTANT NOTICE

An LCD panel and/or video monitor may be installed in a motor vehicle and
visible to the driver if the LCD panel or video monitor is used for vehicle
information, system control, rear or side observation or navigation. If the
LCD panel or video monitor is used for television reception, video or DVD
play, the LCD panel or video monitor must be installed so that these features
will only function when the vehicle is in"park" or when the vehicle's parking
brake is applied.
An LCD panel or video monitor used for television reception, video or DVD
play that operates when the vehicle is in gear or when the parking brake is
not applied must be installed to the rear of the driver s seat where it will
not be visible, directly or indirectly, to the operator of the motor vehicle.
1. OBJECT AND LIQUID
Do not insert objects of any kind into the system through its openings;
do not spill or spray liquid on or into the system (this may result in a
fire or electric shock). Do not place heavy objects on the unit. To ensure
proper ventilation and proper operation, never cover or block the slots
and openings.
2. DISASSEMBLE
Do not attempt to disassemble the unit. There is a risk of electric shock
and/or exposure to Laser Radiation. Contact qualified service personnel
if your system is in need of repair.
3. CLEANING UNIT
When cleaning, make sure the system is unplugged from the power
source. Do not use any solvents or cleaning materials. Clean the DVD
player using a lightly dampened lint free cloth to wipe the unit.
2

HOW TO WATCH TV

Press the Mode button to go to the TV mode. Active channels can be auto stored
by pressing STOP ( MEMORY) button.
B
Select the channels you want by pressing NEXT (CH+)
(CH-) button (see page 14 remote controller picture).
D
Note: Channels may not be selectable if in a bad RF signal area.
ADD/DEL
Use this function to delete or memorize a channel you want.
Select the channel you want by pressing the number buttons and add or
erase the channel by pressing ENTER (ADD/DEL)
Remote Control:
Enter
/Add
button or PREVIOUS
C
button.
A
A
B
C
/CH+
D
/CH-
19