Cleaning Your Floors - Bissell CROSSWAVE X7 CORDLESS 2832F Manual

Cleaning Your Floors

We have cleaning tips for stuck-on messes and more at global.BISSELL.com.
Mode
Power
1.
Press the power button
ON. Press the mode button to
switch between modes.
4.
Hold the solution spray
trigger to apply solution on
forward and backward passes.
Cleaning Modes
Hard Floor Mode
BEST FOR
Everyday messes
on sealed hard floors, like
tracked-in mud, spilled cereal
and milk, coffee, and more!
SOLUTION
SUCTION
ATTENTION
rugs. Stalling the brush may result in premature belt failure.
8 global.BISSELL.com
2.
Recline to start the brush
roll spinning. Brush roll will not
spin when machine is upright.
5.
Release the trigger and
make a backward pass without
dispensing solution. To dry
floors faster, make additional
dry passes.
Area Rug Mode
BEST FOR
cleaning dry messes, like
crumbs, dirt, hair, and more
from area rugs.
SOLUTION
SUCTION
Do not overwet carpet or hardwood floors. Be careful not to run over loose objects or edges of area
Refreshing and
3.
Before each use, hold the
solution spray trigger for 10
seconds to prime the system
with solution.
LED lights are always
illuminated, but turn blue when
the trigger is held. Bubbles will
appear in brush roll window
when solution is flowing.
Power
6.
Turn OFF the machine by
pressing the power button.
TURBO Mode
EXTRA BOOST OF CLEANING
FOR:
Tough messes, eliminating
odors, and removing stuck-on
messes, like pet drool and food;
jelly, honey, tracked-in mud,
and more.
SOLUTION
SUCTION