Read safety warnings, instructions illustrations provided for this piece of strength equipment. Failure to follow all instructions listed below may result in serious injury or death. User assumes all potential risks of assembly or use of this product. PERSONAL SAFETY ●...
Required Tools ● Crescent Wrench ● 1 ⅛” and 9/16” Socket and Wrench Parts 3PRWS-001 (x1) Part A 3PRWS-003 (x2) Part C *3PR-100 (x1) Part MB* (Upgrade; Replaces Part A) 3PRWS-004 (x1) Part D 3PRWS-002 (x1) Part B 3PRWS-005 (x2) Part E 3PRWS-006 (x2)
Page 4
3PRWS-008 (x2) Part H 3PRWS-007 (x2) Part G 3PRWS-010 (x8) Part N 3PRWS-009 (x2) Part I ¾” Flat Washer (x12) Part O ¾ x 4.5” Bolt (x16) Part J ¾” Lock Washer (x16) Part P ¾” Nut (x16) Part K ⅜”...
Page 5
Assembly Part B will have part I placed with it in the organization displayed above in Image 2 and part D will have part H placed In the Image 1 above the arrows with it in the same organization display where the bottom and top as part B.
Page 6
In Image 3 above displays where all other ¾” hardware will be placed and the organization of the hardware can be seen in Image 4.
Page 7
Image 5 above displays the organization of the ⅜” hardware which will be used for part N.
Page 8
*Place parts E, F, and G in desired location*...
Page 9
You have now completed assembling your very own 3x3 Rack with Weight Storage! Thank you for choosing Texas Strength Systems for your fitness needs. If you have any questions, comments, or concerns please don’t hesitate to contact our staff. Contact Information Email: wesz@texasstrengthsystems.com Phone: (210) 233-6110, (210)-920-4877...
Need help?
Do you have a question about the 3x3 Power Rack with In-Line Weight Storage and is the answer not in the manual?
Questions and answers