Download Print this page

TSS 6-in-1 Yoke Assembly Instructions Manual

Download this manual

6-in-1 Yoke

Need help?

Do you have a question about the 6-in-1 Yoke and is the answer not in the manual?

Page 1 6-in-1 Yoke...
Page 2 Read safety warnings, instructions illustrations provided for this piece of strength equipment. Failure to follow all instructions listed below may result in serious injury or death. User assumes all potential risks of assembly or use of this product. PERSONAL SAFETY ●...
Page 3 Parts 6IN5-004 (x2) Part D 6IN5-001 (x2) Part A 6IN5-005 (x2) Part E 6IN5-002 (x2) Part B 6IN5-006 (x2) Part F 6IN5-003 (x1) Part C 6IN5-007 (x2) Part G...
Page 4 6IN5-008 (x4) Part H *6IN5-010 (x2) Part K* (Upgrade) 6IN1-009 (x2) Part I 6IN5-010 (x8) Part J...
Page 5 Assembly 1 of 6 (Farmers Walks) Place parts A, F and J together in the orientation seen from image 1. (~100 lbs Empty)
Page 6 Assembly 2 of 6 (Frame Carry) Using the previous assembly add part D and J as seen in image 2. (~137 lbs Empty)
Page 7 Assembly 3 of 6 (Sled) Using the assembly from the previous image add on part H as seen in image 3. (~162 lbs Empty)
Page 8 Assembly 4 of 6 (Car Deadlift Frame Simulator) (~178 lbs Empty)
Page 9 Assembly 5 of 6 (Yoke) (~157 lbs Empty)
Page 10 Assembly 6 of 6 (Squat Stands) Upgraded Safeties No Safeties From the previous assembly place part I and K (If applicable) in desired location.
Page 11 You have now completed assembling your very own 6-in-1 Yoke! Thank you for choosing Texas Strength Systems for your fitness needs. If you have any questions, comments, or concerns please don’t hesitate to contact our staff. Contact Information Email: wesz@texasstrengthsystems.com...