Advertisement
Quick Links
Advertisement
Related Manuals for TSS 2.5 x 2.5 Power Rack with Belt Squat
Summary of Contents for TSS 2.5 x 2.5 Power Rack with Belt Squat
- Page 1 2.5 x 2.5 Power Rack with Belt Squat...
-
Page 2: Personal Safety
Read safety warnings, instructions illustrations provided for this piece of strength equipment. Failure to follow all instructions listed below may result in serious injury or death. User assumes all potential risks of assembly or use of this product. PERSONAL SAFETY ●... - Page 3 Required Tools ● Crescent Wrench ● 9/16” Socket and Wrench ● 5/32 Allen Key Parts 2.5PRBS-001 (x1) Part A 2.5PRBS-003 (x1) Part C *2.5PR-100 (x1) Part MB* (Upgrade; Replaces Part A) 2.5PRBS-004 (x2) Part D 2.5PRBS-002 (x1) Part B...
- Page 4 2.5PRBS-005 (x1) Part E 2.5PRBS-010 (x1) Part J 2.5PRBS-006 (x1) Part F 2.5PRBS-011 (x1) Part K 2.5PRBS-007 (x2) Part G 2.5PRBS-008 (x1) Part H 2.5PRBS-012 | (x1) | Part L 2.5PRBS-009 (x1) Part I...
- Page 5 2.5PRBS-013 (x2) Part M 2.5PRBS-016 (x2) Part R 2.5PRBS-017 | (x2) | Part S 76 ½” Cable (x1) Part N 2.5PRBS-018 | (x10) | Part T 84 ½” Cable (x1) Part O 2.5PRBS-014 (x2) Part P...
- Page 6 ⅜” Flat Washer (x32) Part W 2.5PRBS-015 (x2) Part Q ⅜” Lock Nut (x40) Part X Carabiner (x3) Part V ⅜” Wing Nut (x2) Part AB Spacer (x2) Part AC ⅜” x 7.5” Bolt (x2) Part Y Set Screw Collar | (x2) | Part AD Rubber Stopper (x2) Part Z...
- Page 7 Assembly Image 1 above displays the assembly of the L, M, Z, and AD.
- Page 8 Part C will have part R placed with it in the organization displayed in Image 3 above and part E will have part O placed In the Image 2 above the arrows with it in the same organization display where parts C, E and D as part C and R.
- Page 9 Image 4 above displays where parts A, B, and C will be attached and the organization of the hardware can be seen in Image 5.
- Page 10 Using the parts that were assembled in image 1 place them into part E until the assembly is above part C and slide them into part C. Once inserted, tighten part part AD with a 5/32 allen key.
- Page 11 Parts Y, H, G, AB, and AE will come pre-assembled in the manner displayed above. Parts H and AE can be placed in different locations as desired; above simply shows them placed in the center holes of part G.
- Page 12 Parts I and J will be placed on top of the power rack as seen in image 8 above. The assembly created in image 7 will be placed beneath the parts I and J as seen in image 8. Parts I, J, and the previous assembly will be attached with parts AA and X.
- Page 13 Attach part N to part L with part V. With part V removed on the other end feed part N through the hole in part E and across part B as seen in image 9 above.
- Page 14 Image 10 above displays the organization of the remaining ⅜” hardware which will be used for part T.
- Page 15 *Place P, R, and S in desired location*...
- Page 16 Place part F on top of part D. Attach part O to N with part V. Feed part O underneath part F ensuring that it lines up with the pulley underneath part F. *These parts can be removed and attached as desired.*...
- Page 17 To use the low cable system attach part O to N with V and feed it through part K as seen in image 13. *These parts can be removed and attached as desired.*...
- Page 18 You have now completed assembling your very own 3x3 Rack with Weight Storage and Belt Squat Attachment! Thank you for choosing Texas Strength Systems for your fitness needs. If you have any questions, comments, or concerns please don’t hesitate to contact our staff. Contact Information Email: wesz@texasstrengthsystems.com...
Need help?
Do you have a question about the 2.5 x 2.5 Power Rack with Belt Squat and is the answer not in the manual?
Questions and answers