Kyocera M5526cdw Frequently Asked Questions Manual page 30

IP, this is the most common and preferred method, Select the
IP tab. Verify the Protocol is set to Line printer daemon/LPD,
this is the recommended protocol for Kyocera printers.
Enter the IP address of the desired printer, the queue will
remain blank.
If Generic Postscript printer is displayed in the Use box, It
+
could be that you are not connecting to the correct printer
or it is offline. Also, it could mean that the driver files are
not installed.
Verify the correct model number with KDPL in parenthesis
+
is in the "Use" box.
Change the name if you don't want just the IP as the
+
name. Location is optional also.
After any one of the previous install procedures, it leads
+
us to this screen. The printer has been installed. Here you
can verify the PPD and the Options.
Press options and supplies, in the General tab you can
+
change the name or location and check the version of
the driver.
In the Options tab you can change the installed options
+
Supply levels will show current status of toner and
waste toner.
FAQs M5526cdw
From this area you can also print a test page. Select open print
queue, the print spooler dialog will open, from the top menu on
computer select Printer then print test page. A test page will
be sent to the printer.
30