Kyocera M5526cdw Frequently Asked Questions Manual page 29

That install put the printer files and PPDs where they
need to go on the Apple computer. Now for the actual printer
setup.
First verify that your Kyocera device is powered on and
connected to USB or network. Select the apple icon in upper
left corner of computer screen, select System Preferences,
then select Printers and Scanners.
This will bring up the list of installed printers. To add a printer,
press the plus sign in lower left.
This will start the install dialog.
Default will automatically discover your device with the Bonjour
protocol if it's connected to a network and the device has
Bonjour enabled (Bonjour is on by default our devices) also this
is the method you would select for a USB connected printer.
IP will allow you to enter a specific IP address for the device
you're connecting to. (this is the preferred and most common
method of adding networked Kyocera Devices).
FAQs M5526cdw
Default. Select the default tab. All your network and USB
connected devices should appear in the window. Select your
device, at this point verify in the "Use" field the correct model
is selected with KPDL in parenthesis. By default, Apple selects
Secure Airprint. This selection will not work correctly for our
printers. Click the Use dropdown and change it to the correct
PPD.
You can edit the Name and Location to whatever you wish.
Press add and the printer will be added to the device list.
29