Removing And Reinstalling The Main Parts - Sharp CD-C605H Service Manual

CP-C605H
STEP REMOVAL
1 Speaker 1. Net Frame ............... (A1) x1
2. Duct Panel .............. (A2) x1
3. Screw ...................... (A3) x4
Speaker Box
(A3)x4
(A1)x1
ø4x12mm
Net Frame
Figure 9-1

REMOVING AND REINSTALLING THE MAIN PARTS

CD MECHANISM SECTION
Perform steps 1, 2, 3, and 11 ~15 of the disassembly method
to remove the CD mechanism.
How to remove the turntable up/down/loading
motor (See Fig. 9-2)
1. Remove the screws (A1) x 2 pcs., to remove the turntable
up/down/loading motor.
How to remove the pickup (See Fig. 9-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x 1 pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1 pc.
3. Remove the pickup.
Note:
After disconnecting the optical pickup connector, wrap the
front end of connector in conductive aluminum foil to prevent
damage to the optical pickup by static electricity.
All manuals and user guides at all-guides.com
PROCEDURE
FIGURE
9-1
(A2)x1
Duct Panle
Turntable/Up/
Loading/Down Motor
Motor
PWB
(B1) x2
ø2.6x6mm
Shaft
(B2) x1
– 9 –
CD-C605H
(A1) x2
ø2.6x5mm
Figure 9-2
Stop Washer
(B3)x1
Pickup
CD Mechanism
Gear
(B4) x1
Figure 9-3