Wall Mounting - AT&T E5937 User Manual

Getting started

Wall mounting

The base can be installed on any standard wall-phone outlet as shown below. Choose a
location away from electronic equipment, such as personal computers, computer rout-
ers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
1) Connect telephone line cord and AC
power cord to telephone jacks and wall
jacks, as shown on page 9.
2) Install wall mount bracket onto set.
First put the two front wall mount
bracket tabs into the front notches
on bottom of telephone base, then
squeeze the rear tabs of the wall
mount bracket as you insert them into
the rear notches on the bottom of
the telephone base.
NOTE: To disassemble the wall
mount bracket, squeeze the rear notches
while lifting up the wall mount bracket
back and away from the telephone base.
3) Plug power adapter into electrical
outlet.
4) Plug telephone line cord into tele-
phone cord wall jack.
5) Position the wall mount bracket
over the wall outlet mounting pegs,
and press and slide the wall mount
bracket down firmly so it is held
securely on the outlet mounting
pegs.
b
a a
11
b