Message Playback - AT&T E5937 User Manual

Number of messages (or, during
playback, message number cur-
rently playing).
Press PLAY/STOP to
begin or end message playback.
1.
(Play/Stop)
"You have [xx] new
messages and [xx] old
messages."
Message playback begins. See
options at right.
2.
(Play/Stop)
Message playback ends.
NOTES:
1. If F is flashing in the message
window, memory is full. You
will have to delete some mes-
sages before new ones can
be recorded.
2. New (unheard) messages
cannot be deleted.
Answering system operation

Message playback

Press
PLAY/STOP
announces the number of messages, then begins play-
back.
If you have new messages, you will hear only the new
messages (earliest first). If there are no new messages,
the system will play back all messages (earliest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear "End of mes-
sages." If the system has less than five minutes of
recording time left, it will announce the remaining
time.
Options during playback
• Press the
VOLUME
• Press to skip to next message (or hold down
SKIP
to speed up message playback).
• Press to repeat message currently playing.
REPEAT
Press twice to hear previous message (or hold down
to slow message playback).
• Press to delete message being played back.
DELETE
• Press
PLAY/STOP
To delete all old messages
To delete all old messages, press and hold
the phone is idle (not during a call, or during message
playback). New or unheard messages cannot be deleted.
35
to hear messages. The system
button to adjust speaker volume.
to stop playback.
while
DELETE