Freewing F-16 FIGHTING FALCON User Manual page 4

PNP Installation Instruction
Install main wing
1.Insert the carbon tube into fuselage.
Carbon tube （Ø6x500mm）
Tail wing set
Install Horizontal tail
平 尾 组 装
As the right photo shown
1.Use glue to attach the horizontal
tail on the tail fuselage.
2.Use glue to attach the carbon
piece on the bottom of elevator,
it can be stronger.
3.Repeat above steps to install
another horizontal tail.
A-Tail fuselage
B-Horizontal tail
C-Carbon piece
Note:There is a EPO glue on
package,please use it to glue.
Glue should be spread evenly,
and wait for 90 seconds.Then
install on,its best glue condition.
3
C
B
R
2.Connect the main wing servo cable and fuselage
extension cable, then install left/right main wing.
3.Use 4pcs screws to fix the main wing.
Screw（PWA3x8 4pcs）
Step
2
A
EN
main wing trough port
Step
1
F-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V01