Table of Contents
Advertisement
2.
Press any key to continue. The password field setting is changed to
Clear.
A note about passwords
The Supervisor password is required to enter the BIOS Setup program
preventing unauthorized access. The User password is required to
boot the system preventing unauthorized use.
Forgot your password?
If you forget your password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. The RAM data containing the password
information is powered by the onboard button cell battery. If you
need to erase the CMOS RAM, refer to section "2.6 Jumper" for
instructions.
Password Check
This field requires you to enter the password before entering the BIOS
setup or the system. Select [Setup] to require the password before
entering the BIOS Setup. Select [System] to require the password before
entering the system. Configuration options: [Setup] [System]
5.7
Tool menu
Press Enter to run ASUS EZ Flash 2.
Main
Advanced
ASUS EZ Flash 2
5.8
Exit menu
The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.
Main
Advanced
Exit & Save Changes
Exit & Discard Changes
Load Setup Default
Discard Changes
ASUS V-Series P5V900
Phoenix-Award BIOS CMOS Setup Utility
Power
Boot
Tools
Phoenix-Award BIOS CMOS Setup Utility
Power
Boot
Tools
Exit
Item Specific Help
This option save data
to CMOS and exiting
the setup menu.
Exit
Item Specific Help
This option save data
to CMOS and exiting
the setup menu.
Select Menu
Select Menu
5-33
Advertisement
Table of Contents
