Table of Contents
Advertisement
5.5.4
Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. Select an item then press <Enter> to
display the configuration options.
Q-Fan Controller
Vcore Voltage
3.3V Voltage
5V Voltage
x
12V Voltage
CPU Temperature
M/B Temperature
CPU Fan Speed
Chassis Fan Speed
CPU Fan Speed warning
F1:Help
ESC: Exit
Q-Fan Controller [Enabled]
Disable or Enable the Q-Fan controller. Configuration options: [Disabled]
[Enabled]
Vcore Voltage [Enabled]
Sets the Vcore Voltage. Configuration options: [1.29V] [Ignored]
3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU/Chassis Fan Speed
The onboard hardware monitor automatically detects and
displays the CPU and chassis fan speeds in rotations per
minute (RPM). These items are not user-configurable.
5-28
Phoenix-Award BIOS CMOS Setup Utility
Power
Hardware Monitor
↑↓ : Select Item
→←: Select Menu
[Enabled]
[1.29V]
[3.33V]
[4.96V]
[11.96V]
54C
40C
2136 RPM
0 RPM
[800 RPM]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Press
[Enter] to
enable or
disable.
F5: Setup Defaults
F10: Save and Exit
Chapter 5: BIOS setup
Advertisement
Table of Contents
