Primary Ide Master/Slave - Asus P5V900 Manual

5.3.3

Primary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE
devices. There is a separate sub-menu for each IDE device. Select a device
item then press <Enter> to display the IDE device information.
Main
Primary IDE Master
Access Mode
Capacity
Cylinder
Head
Sector
PIO Mode
UDMA Mode
Transfer Mode
F1:Help
ESC: Exit
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not
user-configurable. These items show N/A if no IDE device is installed in the
system.
PIO Mode [Auto]
Sets the PIO mode for the IDE device.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3]
[Mode 4]
UDMA Mode [Auto]
Disables or sets the UDMA mode. Configuration options: [Disabled] [Auto]
Primary IDE Master/Slave [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If
automatic detection is successful, the BIOS automatically fills
in the correct values for the remaining fields on this sub-menu.
If the hard disk was already formatted on a previous system,
the setup BIOS may detect incorrect parameters. Select
[Manual] to manually enter the IDE hard disk drive parameters.
If no drive is installed select [None]. Configuration options:
[None] [Auto] [Manual]
5-16
Phoenix-Award BIOS CMOS Setup Utility
Primary IDE Master
↑↓ : Select Item
→←: Select Menu
[Auto]
[Auto]
0 MB
0
0
0
[Auto]
[Auto]
None
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Press [Enter] to select.
F5: Setup Defaults
F10: Save and Exit
Chapter 5: BIOS setup