Advantech AIMB-258 User Manual page 49

! Power Management [User Defined]
This item allows user to select system power saving mode.
Min Saving
Max Saving
User Define
! Video Off Method [DPMS]
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank This option will cause system to turn off vertical and horizontal syn-
Blank Screen
DPMS
! Video Off In Suspend [Yes]
This item allows user to turn off Video when the system enters suspend mode.
! Suspend Type [Stop Grant]
This item allows user to determine the suspend type.
! Modem use IRQ [3]
This item allows user to determine the IRQ which the MODEM can use.
! Suspend Mode [Disabled]
Shows the time of system inactivity before all devices except the CPU will be
shut off.
! HDD Power Down Mode [Disabled]
This item allows user to determine the time of system inactivity, the hard disk
drive will be powered down.
! Soft-Off by PWR-BTTN [Instant-Off]
This item allows user to define function of power button.
Instant-Off
Delay 4 Sec
PWRON After PWR-Fail [ON/Off/Former-Sts]
!
Use this to set up the system after power failure. The "Off" setting keeps the sys-
tem powered off after power failure, the "On" setting boots up the system after
failure, and the "Former-Sts" returns the system to the status before power fail-
ure.
! PowerOn by LAN [Enabled]
This item allows users to power on the system via LAN. The choices are
"Enabled" and "Disabled".
PowerOn by Modem [Enabled]
!
This item allows users to power on the system by Modem. The choices are
"Enabled" and "Disabled".
! USB KB Wake_Up From S3 [Disabled]
This item allows user to set USB keyboard wake up system from S3 Enable or
Disable.
! PowerOn by Alarm [Disabled]
The choices are "Enabled" and "Disabled". If enabled, the fields that follow indi-
cate dates and times of alarm settings.
Minimum power management. Suspend Mode=1 hr.
Maximum power management. Suspend Mode=1 min.
Allows user to set each mode individually. Suspend Mode= Dis-
abled or 1 min ~1 hr.
chronization ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
Press power button then Power off instantly.
Press power button 4 sec. to Power off.
41 AIMB-258 User Manual