Bissell CROSSWAVE X7 Using page 2

If machine stops in middle of cycle and orange dirt tank
o
indicator starts blinking on digital display, remove and
empty dirty water tank
Clean out cycle button will be inactive until dirty
▪
water tank is emptied
Place empty dirty water tank back on machine,
▪
click clean out cycle button and the clean out cycle
will resume
If machine does not start the clean out cycle when the
•
button is pushed, re-seat the machine onto the dock and
allow it to charge for 30 minutes before trying again
When cycle is complete, remove brush roll window by
•
pressing the button on the top of the foot and resting the
brush roll window on the 3-in-1 docking station