Jet Cleaning; Surface Scratch Removal - Aquatic LuxeAir Series Owners Manual/Install Manual

Aquatic hot tub owner's manual & installation guide
Hide thumbs Also See for LuxeAir Series:
Table of Contents

Advertisement

mAiNTENANCE ANd CArE
SurFACE CLEANiNg:
use common household, non-abrasive cleaners for most cleaning jobs. rinse well and dry with a clean cloth. Never
use abrasive cleaners. Do not allow your Lucite® acrylic surface to come into contact with products such as acetone
(nail polish remover), nail polish, dry cleaning solution, lacquer thinners, gasoline, pine oil, etc. remove dust with a soft,
dry cloth. clean grease, oil, paint, and ink stains with isopropyl (rubbing) alcohol.

jET CLEANiNg:

All LuxeAir series jets are removable, and can simply be put into the dishwasher for easy cleaning. see Jet Operation
Instructions for removal, pages 15-17. (Note: use top rack of dishwasher and remove before the drying cycle starts.)

SurFACE SCrATCh rEmOVAL:

Minor scratches may be removed by polishing your tub with a non-abrasive car polish, followed by buffing. Deeper
scratches can be removed by:
sanding with wet 400 grit sandpaper.
sanding with wet 600 grit sandpaper.
sanding with wet micro-grit sandpaper.
Buff out using car polish.
rEPAir:
The installation and service of your whirlpool bath should be performed only by a qualified service technician. Remember
when contacting your dealer always have your serial number, proof of purchase and model number available. This will
ensure a quick response on warranty items.
The model and serial numbers are located above the pump on the backside of the whirlpool.
NOTE: ALL wArrANTy rEPAirS muST BE AuThOrizEd By AquATiC BEFOrE wOrK iS STArTEd.
FOr SErViCE, ALwAyS CONTACT yOur dEALEr.
CAUTION: care should be taken to prevent inappropriate chemicals coming in contact with the Lucite® acrylic surface.
Please read and observe all instructions and/or warnings on containers containing substances you contemplate applying
to your whirlpool. Any failure to comply may void your warranty.
wATEr quALiTy iSSuES:
Owners of fill and drain whirlpool bathtubs need to know basic information concerning water quality: how it affects
performance and enjoyment of the operation of their tubs, and steps that can be taken by the owner to correct related
problems. Important issues are the microbiological and chemical quality of the water.
1. miCrOBiOLOgiCAL quALiTy
Microbes are present in water supplied by individual wells or water systems and even in the air around us. These microbes
are usually in amounts below what is noticeable. Microbes from the water or air or from a bathers body may settle on
wetted surfaces such as a whirlpool bathtub's surface or piping systems where they can grow in numbers where we
can notice them. with regards to whirlpool bathtubs, brown/black fungi/mold or pigmented (colored) bacteria can be
noted.
Fungi/mold- Fungi and mold are always present. The levels are usually such that we do not notice them. When moisture
and temperature are sufficient, the organisms will grow to levels that we may smell and/or see. The best example of such
growth is the very common black growth on the bottom of shower curtains. The best solution to keep these surfaces
free from growth is frequent cleaning.
26
aquatic Industries, Inc.

Advertisement

Table of Contents
loading

Table of Contents