The Therm-O-Flow Pump Module consists of a spe-
cially designed Check-Mate 800 Displacement Pump
for heated applications, combined with a sensor,
junction box, band heaters, insulation, and shrouds.
The pump module is the lower pump assembly in
either a 200 liter (55 gal.) or 20 liter (5 gal.) supply unit.
You install it between the bottom of the air motor and
the top of the follower.
Fig. 1
6
310530
Introduction
This manual describes installing, operating and servic-
ing the pump module. For information about the pump
itself, see 308570.