Download
Share
Print this page
  1. Manuals
  2. Brands
  3. baby&child Manuals
  4. Baby & Toddler Furniture
  5. 367-24
  6. Manual

baby&child 367-24 Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
All Restoration Hardware cribs are designed to meet the highest safety
standards and comply with all U.S. and Canadian cribs and cradles regulations.
Made in Vietnam
Distributed in the U.S.A by:
Restoration Hardware Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING:
Read all
Instructions before assembling this
product. KEEP INSTRUCTIONS
FOR FUTURE USE.
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing
to the address above. Include the product model number, color, and a brief description of the part. Call
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Clean with mild soap on soft rag.
Rinse and dry thoroughly. If the crib is to be stored, store in a cool dry place and carefully package all original
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After crib is
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
CUSTOMER SERVICE
1-800-762-1751.
CARE AND CLEANING
hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included).
NOTE: It may be easier to assemble product with two people.
Page 1 of 9
Model No: 367-24
Haven Conversion Crib

Advertisement

loading
Need help?

Need help?

Do you have a question about the 367-24 and is the answer not in the manual?

Questions and answers

Related Manuals for baby&child 367-24

Summary of Contents for baby&child 367-24

  • Page 1 All Restoration Hardware cribs are designed to meet the highest safety standards and comply with all U.S. and Canadian cribs and cradles regulations. Model No: 367-24 Made in Vietnam Haven Conversion Crib Distributed in the U.S.A by: Restoration Hardware Baby & Child 11640 Harrel St.
  • Page 2 IMPORTANT SAFETY INFORMATION FOR CRIBS WARNING : Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant. WARNING : Failure to follow these warnings and the assembly instructions could result in serious injury or death. Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
  • Page 3 IMPORTANT SAFETY INFORMATION FOR CRIBS CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES. Page 3 of 9...

  • Page 4: Parts Included

    IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS WARNING: ENTRAPMENT/ STRANGULATION HAZARD Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child.
  • Page 5 ASSEMBLY INSTRUCTIONS HARDWARE LIST ITEM DESCRIPTION QUANTITY Spring Washer 1/4" 4pcs. 4pcs. 4pcs. Short Bolt 5/16"x50mm 4pcs. Multi Wrench 1pc. Mattress nut 16pcs. Long Bolt 5/16"x80mm 8pcs. Spring Washer 5/16" 12pcs. K.D. Barrel Nut 4pcs. 1 pc. Allen Key Page 5 of 9...
  • Page 6 ASSEMBLY INSTRUCTIONS ITEM DESCRIPTION QUANTITY 12pcs. 12pcs. STEP 1 Attach Stretcher Bar (4) to the L Side Frame (2) and R Side Frame (3). Insert Barrel Nut (II) into holes in Stretcher Bar (4). Align threaded hole in Barrel Nut (II) with Long Bolt (GG), Spring Washer (HH) and Allen Key (KK).
  • Page 7 ASSEMBLY INSTRUCTIONS STEP 2 Place the support at the highest setting for newborns, then adjust to lower positions as the child grows and becomes mobile. Once the child is able to stand, the Mattress Support (6) should be at its lowest setting. Note: The Mattress Support (6) is easily adjustable to varying heights by loosening and removing all of...
  • Page 8 ASSEMBLY INSTRUCTIONS STEP 4 Fill empty openings in the sides of the Mattress Support (6) with hardware. Insert Small Bolts (MM) and Hex Nuts (FF) and tighten with Multi Wrench (EE) and Allen Key (KK). Then insert Cap Hex Nuts (LL) onto ends of Small Bolts (MM) and tighten with Multi Wrench (EE).
  • Page 9 ASSEMBLY INSTRUCTIONS STEP 6 Position the Stationary Sides (5) between the L Side Frame (2) and R Side Frame (3), and align the holes. STEP 7 Bolts (DD), then insert them into the holes and tighten using the Allen Key (KK). DO NOT OVERTIGHTEN.