baby&child 367-19 Quick Start Manual

All Restoration Hardware cribs are designed to meet the highest safety
standards and comply with all U.S. and Canadian cribs and cradles regulations.
Made in Vietnam
Distributed in the U.S.A by:
Restoration Hardware Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING:
Read all
Instructions before assembling this
product. KEEP INSTRUCTIONS
FOR FUTURE USE.
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief description of the part. Call 1-800-762-1751.
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Clean with mild soap on soft rag. Rinse
and dry thoroughly. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After crib is completely
assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
CUSTOMER SERVICE
CARE AND CLEANING
protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included).
NOTE: It may be easier to assemble product with two people.
Page 1 of 9
Model No: 367-19
Haven Panel Crib