Advertisement
All Restoration Hardware cribs are designed to meet the highest safety
standards and comply with all U.S. and Canadian cribs and cradles regulations.
Made in Vietnam
Distributed in the U.S.A by:
Restoration Hardware Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING:
Read all
Instructions before assembling
this product. KEEP
INSTRUCTIONS FOR FUTURE
USE.
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing
to the address above. Include the product model number, color, and a brief description of the part. Call
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Clean with mild soap on soft rag.
Rinse and dry thoroughly. If the crib is to be stored, store in a cool dry place and carefully package all original
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After crib is
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
CUSTOMER SERVICE
1-800-762-1751.
CARE AND CLEANING
hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included).
NOTE: It may be easier to assemble product with two people.
Haven Conversion Toddler Kit
Page 1 of 4
Model No: 367-22
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for baby&child 367-22
Summary of Contents for baby&child 367-22
- Page 1 All Restoration Hardware cribs are designed to meet the highest safety standards and comply with all U.S. and Canadian cribs and cradles regulations. Model No: 367-22 Made in Vietnam Haven Conversion Toddler Kit Distributed in the U.S.A by: Restoration Hardware Baby & Child 11640 Harrel St.
- Page 2 IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS WARNING: ENTRAPMENT / STRANGULATION HAZARD Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child.
- Page 3 TODDLER RAIL ASSEMBLY INSTRUCTIONS STEP 1 Remove Stationary Side Rail (5) from the crib by carefully unscrewing and removing the (4pcs) short bolts with spring washer on Left /Right sides of the Stationary Side Rails (5) using Allen Key (KK). Please keep the hardware for the use in Step 4.
- Page 4 TODDLER RAIL ASSEMBLY INSTRUCTIONS STEP 3 When converting the crib to toddler bed, the Small Bolt (NN), 2pcs, should be inserted in the upper holes of the L Side Frame (2) and R Side Frames (3), and tighten with the Allen Key (KK).
Need help?
Do you have a question about the 367-22 and is the answer not in the manual?
Questions and answers