Advertisement
Quick Links
This product is only suitable for well insulated spaces or
occasional use.
Read the instructions carefully before installing and operating the appliance or performing
maintenance operations. Observe all the safety instructions; failure to observe the instructions may
cause accidents and/or damages. Store these instructions for future reference.
V 05/21
CERAMIC TABLE FAN HEATER
OPERATING INSTRUCTIONS
CLOE
EN
13
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argo CLOE
Summary of Contents for Argo CLOE
- Page 1 CERAMIC TABLE FAN HEATER CLOE This product is only suitable for well insulated spaces or occasional use. OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages.
-
Page 2: General Safety Information
GENERAL SAFETY INFORMATION Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Ensure that the mains power complies with the voltage specified on the fan heater data plate (220-240V~50Hz). - Page 3 WARNING: do not use the fan heater with a controller or any other external device that activates appliance automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned. • The appliance is equipped with IP21 protection degree and can also be used in the bathroom, in zone 2.
- Page 4 To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan heater operates. Do not use the appliance if the cord or plug are damaged. If the power cable is damaged, it must be replaced by the manufacturer or its technical assistance service or in any case by a person with a similar qualification, in order to prevent any risk.
- Page 5 WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING. The symbol below signals the above warning: The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable material including curtains, drapery, blankets, etc.
-
Page 6: Description Of Parts
stable, flat, level surface when operating, to avoid the chance of the fan heater overturning. Locate the power cord so the fan heater or other objects are not resting on it. Always unplug the fan heater when not in use. ... - Page 7 HOW TO USE THE HEATER Place the fan heater upright on a flat and stable surface. Connect the power cord to an appropriate power outlet (220-240V ~ 50Hz). Turn on the fan heater by pressing the ON / OFF switch located on the back of the product. The POWER LED indicator turns on, while the others remain off.
- Page 8 The Timer is not active and the LED on the control panel is turned off. Ventilation: active. Temperature: The default set temperature is 35 ° C. Oscillation: it is not active and the LED on the control panel is turned off. Press the Power button again to turn off the device and the 60-second countdown appears on the display before entering standby mode.
- Page 9 ECO mode: a) The reference temperatures are 25 ° C and 18 ° C When the ambient temperature is below 18 ° C, the appliance operates at high heating power (2000W). When the ambient temperature is between 18 ° C and 25 ° C, the appliance operates at low heating power (1300W). When the room temperature exceeds 25 °...
-
Page 10: Maintenance And Storage
MAINTENANCE AND STORAGE ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE. IMPORTANT: DO NOT SUBMERGE THE CERAMIC FAN HEATER IN WATER Cleaning the outside surface of the appliance Turn the switch off and unplug before carrying out any maintenance work or moving the appliance. Use a damp cloth to remove any dust from the fan heater. - Page 11 Annex II - Ecodesign requirements - Requirements for product information - COMMISSION REGULATION (EU) 2015/1188 of 28 April 2015 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters Model identifier(s): CLOE Item Symbol...
- Page 12 INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE 2012/19/EU At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local community waste collection centres or to a dealer providing this service. Disposing of electrical and electronic equipment separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled to obtain significant savings in energy and resources.
Need help?
Do you have a question about the CLOE and is the answer not in the manual?
Questions and answers