To Enable/Disable The Tv Display; Using And Adjusting Tv Out; How Tv Display Cannot Be Used - ATI Technologies RADEON 9700 Series User Manual

To Enable/Disable The TV Display

1. Access the Windows
Display.
2. Click the Settings tab and then the Advanced...
button.
3. Click the ATI Displays tab. Click the TV button.
4. Click the enable/disable button.
5. Click OK or Apply to save the changes.

Using and Adjusting TV Out

For information about how to use TV display, right click
the ATI taskbar icon, point to Help, then point to ATI
Television Display.

How TV Display Cannot Be Used

A TV cannot be left connected to the graphics card if
two analog monitors are connected to your RADEON
9700 Series, even if the TV is off and not enabled in the
software.
An analog monitor connected to the DVI-I connector
cannot be left connected to your RADEON 9700 Series
card when TV out is enabled. In both cases, your
RADEON 9700 Series will become overloaded, resulting
in a dim image on all devices.
Using TV Out
®
Control Panel. Double-click
6-5