Starting Windows® With Tv Display Enabled; Using Scart Connectors For European Tvs; How To Enable/Disable The Tv Display - ATI Technologies RADEON 8500 User Manual

25
Starting Windows
The TV screen may become scrambled during the
initial Windows
temporary effect and your screen will be restored
within a few seconds.
During start up, your RADEON card will go through
a sequence of mode settings, during which your TV
display will remain blank. This process takes only a
few seconds and helps program the TV display.

Using SCART Connectors for European TVs

Connect to
TV or VCR
SCART
CONNECTOR
The above illustration shows how to connect your
RADEON 8500 to a European TV using the SCART.
The SCART connector supports only the Composite
video format, which means you will have to use an
S-Video-to-Composite Video Adapter Cable. If
your European TV does support S-Video input, you
should connect directly to the TV with an S-Video
cable rather than through the SCART.
For the RADEON 7500 you can use a Composite
(RCA) cable to connect directly to the SCART.

How To Enable/Disable The TV Display

1
2
®
with TV Display Enabled
®
(Right = red)
Audio In
(Left = white)
Composite Video-In (yellow)
Access the Windows
click Display.
Click on the Settings tab and then the
Advanced... button.
logo display. This is only a
Audio Cable
Video Adapter Cable
®
Control Panel. Double-
Connect to PC
Audio Out
Connect to
RADEON 8500
S-Video Out